Projects financed by National Funds
PI: Agustín R. González-Elipe (Jan-2014/Dec-2016) |
Read more …
This project aims at the development of a new generation of low dimensional responsive systems and sensors that integrate nanostructured layers with well-controlled electrical and optical properties which, prepared by innovative vacuum and plasma methods, present a tunable and high porosity and are able to actively interact with the environment. The basic principles of the oblique angle approach (OAD) during the physical vapor deposition (PVD) of evaporated thin films will be extended to the fabrication of similar layers by plasma and magnetron sputtering techniques. Combination of these techniques along with other innovative plasma technologies, including atmospheric pressure plasma deposition or plasma-evaporation polymerization will be employed to achieve a strict control over the nanostructure and properties of final films and complex systems . Supported metal and oxide nanostructured thin films, stacked multilayers and hybrid and composite suported nanostructures will be prepared and thereafter characterized by advanced electron and proximity microscopies and other techniques. Process-control strategies will be implemented in order to understand the fundamental mechanisms governing the film structurations and to propose new synthetic routes scalable to industrial production so as to achieve tailored morphologies and properties for these porous thin film materials. Highly ordered and homogenous arrays of these nanostructures will be used as ambient temperature gas and liquid sensors, microfluidic responsive devices and intelligent labelling tags. For these applications the supported porous thin films will be suitably functionalized with metal nanoparticles, grafted molecular chains or layers of other polymeric materials. They will be also stacked in the form of vertically ordered photonic structures. Innovative device integration approaches including the water removal of evaporated sacrificial layers of NaCl and their integration in the form of microdevices will be carried out to fabricate advanced sensors, microreactors and responsive systems. Photonic, electrical and/or electrochemical principles of transduction will be implemented into the devices for detecting and/or fabricating i) oxygen and chlorine in solutions, ii) glucose and organic matter in water iii) gas and vapor sensors or iv) inteligent labels. Specific applications are foressen for the control of the outside environment (air and waters), industrial and greenhouse locations, agroindustrial processes such as fermentation and the tracking and trazability of different kinds of goods and foods.
Financial source: Ministerio de Economía y Competitividad Code: MAT2013-40852-R |
Research group: José Cotrino Bautista, Ricardo Molina Mansilla, Victor Rico Gavira, Francisco Yubero Valencia, Juan Pedro Espinós Manzorro, Alberto Palmero Acebedo, Angel Barranco Quero, Fernando Lahoz Zamarro |
Purification of air in greenhouses and food processing centers (RECUPERA2020 – 2.2.3) PI: José Cotrino Bautista (Dec-2013/Dec-2015) |
Read more …
This project is related with a technology to generate a cold plasma at atmospheric pressure with air flowing through a reactor. The specific objective of this activity is the development of a prototype air purification system for greenhouses, food processing centers, livestock enclosures, or other similar types of markets or enclosures where the concentration of gases harmful to the health of the workers can be very significant by the use of insecticides, fungicides, disinfectants or other compounds. The developed system should be able to purify the air in closed installations and where a large number of chemicals, mainly volatile organic compounds, accumulate in the air that is handled. The cold plasma reactor technology design follows the characteristics of packed-bed dielectric barrier discharge by using ferroelectric dielectric.
Financial source: |
Research group: |
Microfluidic integrated sensors for the control of fermentation (RECUPERA2020 – 1.4.1) PI: Agustín R. González-Elipe (Dec-2013/Dec-2015) |
Read more …
The objective of this Project is the development of new integrated and robust micro/nano- fluidic systems that enable the reliable incorporation of control tests, sensorization and rapid analysis of agrofood products, mainly liquids or soluble. The technology to be developed should be applied to final products, as well as during their different elaboration steps. IN particular, a niche of application that will be directly addressed in the project is the control of fermentation process with the development of new integrated fluidic transductors that permit the quantitative detection of glucose and/or other sugars by means of electrochemical and photonic developments integrated in microfluidic and similar devices.
Financial source: Ministerio de Economía y Competitividad Code: RECUPERA2020 – 1.4.1 |
Research group: |
PI: Angel Barranco (Jan-2011/Dec-2013) |
Read more …
NANOPLASMA proposes the development of novel techniques based on plasma for the synthesis and processing of new organic functional materials. In contrast with the established plasma technology used in plasma enhanced CVD and plasma polymerization that implies the complete fragmentation of volatile precursor molecules, NANOPLASMA processes achieve the synthesis of new families of fluorescent thin films and supported 1D nanomaterials by controlling the chemistry and fragmentation degree at the boundaries of plasma discharge. The research focuses in the synthesis of organic matrices with a well controlled nanometric microstructure incorporating luminescent dye molecules (i.e. perylenes, rhodamines, phtalocyanines y porphirins) and 1D luminescent organic nanowires formed by similar molecules. The project also contemplates the development of methodologies based on the plas-ma etching and laser ablation for the production of 2D lithographic patterns of the lumines-cent thin films and nanostructures. The research in this line will be completed with basic stud-ies aiming the development of a “chemical patterning” process based on the plasma surface functionalization and chemical derivatization of self-assembled monolayers. Both the synthetic methodologies and the patterning strategies of NANOPLASMA are fully compatible with the present optoelectronic and silicon technologies and can be adapted to wafer scale integration for mass scale production. These materials and processes will be used for the fabrication of two types of proto-type devices: photonic gas sensors and luminescent microstructures for intelligent labelling applications. The gas sensing devices consist of a luminescence film and/or structure integrat-ed onto a 1D photonic crystal with a stacking defect designed and constructed to couple the luminescent signal of the sensor layer. The intelligent labelling devices are patterned litho-graphic structures made on single or multilayer structures of luminescence films with specific functionalities and environmental responses not achieved by any available technology.
Financial source: Ministerio de Ciencia e Innovación Code: MAT2010-21228 |
Research group: |
PI: Francisco Yubero (Jan-2011/Dec-2013) |
Read more …
Functional TiO2, ZnO, SiO2 and doped SnO2 in the form of porous thin films and other supported fiber-like nanostructures will be prepared by plasma deposition and evaporation at glancing angles (GLAD). Precise control of the nano and microstructure of the films and fibers will be attained by selecting appropriate GLAD deposition conditions and, in the case of plasma deposition, by adjusting the principal plasma parameters after modelling the plasma processes and sheath-related phenomena that control the development of the film/fibers nanostructure. The primary objective of the project is to successfully tailor the porosity and other key properties (optical, electrical conductivity, wetting behaviour etc.) of the synthetized materials to enable novel methods of fluid handling (liquids and gases) at the micro and, possibly, nanoscales so as to invent and develop applications in the fields of microfluidic and microplasmas.
A further objective is the processing of these structures in both 2D (i.e., lithographic processsing) and 3D by use of laser-based techniques, multilayer stacking of different porous thin film structures and/or selected plasma deposition of hydrophobic patches of other materials such as polymers, silicones, etc. Microfluidic thin film-based devices controlled by light (i.e., photonic valves) will then be developed by employing appropriately designed TiO2 and ZnO porous structures. These materials become superhydrophilic when illuminated with light of <390 nm which will be used to selectively illuminate very small areas (channels, micrometer circuits, etc.) by either a suitable lamp or a laser. Light-controlled microfiltration is envisaged as another new application in this field, whereby preferential diffusion/filtration of polar liquids through the illuminated zones may be induced (i.e. valve open). Achieving prompt reversal of this process (i.e. valve closed) is another challenge that will be addressed by the project.
A final, exploratory objective is the modelling, design and development of microplas-mas based on the most promising thin film porous structures developed during the earlier phases of the work. These prototype microplasma devices will consist of porous doped SnO2 thin film electrodes permeable to gases with porous insulator layers (SiO2) acting as separation barriers. Evaluation of the plasma characteristics of these prototype devices will be another distinct task undertaken by the project.
Financial source: Ministerio de Ciencia e Innovación Code: MAT2010-18447 |
Research group: |
Systems for the detection of explosives in public infrastructures PI: Angel Barranco (Sept-2010/Oct-2011) |
Read more …
The objective of the project is the development of thin films with adequate optical properties for their use as active elements in optical gas sensors capable of responding to the presence of gases and/or volatile products produced by the partial decomposition of explosives.
Financial source: Ministerio de Industria (Contrato: ARQUIMEA) Centro para el Desarrollo Tecnológico Industrial (Programa CENIT) |
Research group: |
Surface functionalisation of materials for high added value applications (FUNCOAT) PI: Agustín R. González-Elipe (Dec-2008/Dec-2013) |
Read more …
FUNCOAT is an integrated project within the application call CONSOLIDER-INGENIO 2010 aiming at the exploitation of synergies existing in the Spanish scientific community, with the general objective of developing principles, processes and devices related to the surface functionalisation of materials. The project integrates 14 well-accredited research centres covering from fundamental and theoretical aspects to final applications. This large effort of integration is critical to achieve substantial advances in this broad field, which go beyond the mere accumulation of results. The research teams belong to different institutions: University, CSIC (responsible for the management of the project) and Technological centres. They maintain scientific relationships among them that extend over the last 15 years. Specific scientific and technological objectives are: understanding of fundamental phenomena driving the modification of surfaces and interfaces, control of the micro- and nano- structure of surfaces and thin films, optimization of thin film deposition methods, process development of multifunctional surfaces for novel applications (mechanical and metallurgical, optical, magnetic, energy, biomaterials, etc) and, finally, the production of new devices based on functionalised surfaces. Other important objectives include the technological transfer of the scientific results to the productive sectors as well as the education and training of scientists, young researchers and engineers. Strategic sectors of our modern society where the activities of FUNCOAT find a direct impact are material processing, energy, environment, health care, agriculture, etc. In order to accomplish an efficient coordination of efforts and the integration of the activities of all the groups, the project is structured around six workpackages: A) Fundamental phenomena in surfaces, interfaces and thin films, B) New processes for the control of the micro- and nano- structure of films and surfaces, C) Mechanical and metallurgical coatings for surface protection, D) Chemical functionalisation and biomedical applications, E) Coatings for optical control, photonic applications and solar energy collection and F) Novel magnetic phenomena in surfaces/interfaces.
Financial source: Ministerio de Ciencia e Innovación Code: CSD2008-00023 (CONSOLIDER) |
Research group: |